DMA EPLEXOR HT Series up to 500 N
For ceramics, metals, alloys, glasses, composites and more
The DMA GABO EPLEXOR HT line is the only instrument series on the market which is able to carry out DMA measurements with a maximum dynamic force of 500 N to 1500°C.
Two high-temperature furnaces are available: RT to 1000°C and RT to 1500°C. With a standard furnace (-160°C to 500°C) simultaneously mounted, it is possible to perform consecutive test runs in both the low- and high-temperature range. EPLEXOR HT instruments can thus cover the entire temperature span from -160°C to 1500°C.
The electronics within the system automatically identify which furnace is currently in use.
The following DMA GABO EPLEXOR HT are available:
| Instrument Type | Max. Static Force | Max. Dynamic Force *) |
|---|---|---|
| DMA GABO EPLEXOR 25N HT | 1500 N | ± 25 N |
| DMA GABO EPLEXOR 100N HT | 1500 N | ± 100 N |
| DMA GABO EPLEXOR 150N HT | 1500 N | ± 150 N |
| DMA GABO EPLEXOR 500N HT | 1500 N | ± 500 N |
Technical Data
Temperature range
Static force range
Frequency range
200 Hz
- Dynamic force range:
from ± 25 N up to ± 500 N (depending on instrument type, see table) - Force sensor:
interchangeable; nominal forces available from 10 N to 500 N (depending on the instrument type and configuration) - Static displacement:
max. 60 mm - Dynamic amplitude:
from ± 1.5 mm up to ± 6 mm (depending on the instrument type and system configuration) - Measurement modes for applications above 500°C:
asymmetric and 3/4-point bending, compression - Work space of the high-temperature furnaces:
cylindrical chamber, diameter: 70 mm, height: 120 mm
GET IN CONTACT
Scan the QR-Code with your smartphone
You still have questions and would like to be contacted by our sales department? Would you like to receive a quote for the product? Do you need a poster or brochure for one of our products? Just Scan the QR-Code!